Lenovo 10051 Manuel D’Utilisation

28

User Guide

The files and relevant data used by the rescue system are saved in the service 
partition. Deleting this partition will make the rescue system unusable. For more 
detailed information, see the following instructions:

By selecting Control Panel 

→ Administrative Tools → Computer Management → 

Disk Management, you can see the service partition, which must not be deleted.

  Note: The recovery files and relevant data used by the rescue system are 

saved in the service partition. If the service partition is deleted or damaged
by someone other than authorized Lenovo servicers, Lenovo will not be 
liable for any losses arising there from in any way.

OneKey Recovery is an easy-to use application. You can use it to restore your 
computer to the system default or a previously backed up state. 

Detailed Operation Procedure

1.  Turn on the computer. When the Lenovo logo appears, press the F2 key on the 

keyboard to start the Rescue System, then you can select OneKey Recovery.

  Note: System Recovery will overwrite all of the data on drive C. To prevent

loss of data, be sure to back up relevant data before performing system 
recovery. 

2.  Follow the onscreen instructions to select the backup task you want to restore 

from and disk you want to install operation system, and press Next to start 
restoration.

3.  Please wait during the process of system recovery. Do not interrupt the 

operation during the recovery process.

4.  After the system is recovered successfully, the software prompts to restart the 

computer. Restart the computer and enter the system.

The Driver and Application Installation function in the rescue system provides a way 
for the user to conveniently re-install all of the Lenovo applications and drivers that 
were shipped with your Lenovo hardware.