Lenovo 10051 Manuel D’Utilisation

Page de 51
29
User Guide
Method 1: Automatic Installation
Turn on the computer. When the Lenovo logo appears, press the F2 key on the 
keyboard to start the Rescue System, then select Drivers and Application 
Installation.
Follow the screen prompts to install the Lenovo Drivers and Application Installation. 
Click Install to start installing the  Lenovo Drivers and Application Installation.
The system will restart. After the system has restarted, the installation process will 
continue until completion.
Method 2: Manual Installation
In the Windows system, Click Start 
→ All Programs → Lenovo → Lenovo 
Drivers and Application Installation.
After starting the procedure, install all the drivers and software manually according 
to the prompts.
  Notes: 
1.  It is recommended not to install the software which is already on the
computer.
2.  Before accessing the operating system, make sure that the Drivers and 
Application installation has been installed automatically. After that, the 
manual installation function can be used. 
3.3 System Setup
System Setup configures the network configuration for the Lenovo Rescue
System to ensure your Rescue System can connect to internet. In addition, System 
Setup sets and manages all passwords for the Lenovo Rescue system.
3.3.1 Launch
Turn on the computer. When the Lenovo logo appears, press the F2 key to launch 
Rescue System. Then select System Setup.
3.3.2 Network Settings
Depending on the network access mode of the computer, select “ADSL” or “LAN
Connection” in the network connection modes.
1.  If you select “ADSL,” input the username and password of the ADSL 
connection.