Toshiba TECRA S1 Manuel D’Utilisation
![Toshiba](https://files.manualsbrain.com/attachments/acaaaa9cc6b763ccfc72ced2ae95d9c94b8b8632/common/fit/150/50/8adbcbcd45c75dc53932fc9caf6f2740daed52d836b76efbd0162ac2599f/brand_logo.png)
4 Replacement Procedures
4.15 Display Mask
4-54
TECRA S1 Maintenance Manual
Installing the Display Mask
Install the display mask according to the following procedures and Figure 4-35.
1. Place the display mask in the correct position and fasten the following 18 latches, in
that order:
- Four top latches
- Four latches on each of the left and right sides
- Six bottom latches
- Four top latches
- Four latches on each of the left and right sides
- Six bottom latches
2. Place the display module in the correct position and fasten the following 8 screws, in
that order:
- Two M2.5x3.5 black flat-head screws on the top
- Two M2x5.5 black flat-head screws on each of the left and right sides
- Two M2.5x3.5 black flat-head screws on the bottom
- Two M2.5x3.5 black flat-head screws on the top
- Two M2x5.5 black flat-head screws on each of the left and right sides
- Two M2.5x3.5 black flat-head screws on the bottom
3. Place the display mask in the correct position and fasten the following 2 bumps and
seals, in that order:
- Two rubber bumps on the top
- Two silver seals on each of the left and right sides
- Two black seals on the bottom
- Two rubber bumps on the top
- Two silver seals on each of the left and right sides
- Two black seals on the bottom