Toshiba TECRA S1 Manual Do Utilizador

Install the display mask according to the following procedures and Figure 4-35.  

1.  Place the display mask in the correct position and fasten the following 18 latches, in 

that order: 
- Four top latches 
- Four latches on each of the left and right sides 
- Six bottom latches 
 

2.  Place the display module in the correct position and fasten the following 8 screws, in 

that order: 
- Two M2.5x3.5 black flat-head screws on the top 
- Two M2x5.5 black flat-head screws on each of the left and right sides 
- Two M2.5x3.5 black flat-head screws on the bottom 

3.  Place the display mask in the correct position and fasten the following 2 bumps and 

seals, in that order: 
- Two rubber bumps on the top 
- Two silver seals on each of the left and right sides 
- Two black seals on the bottom