Epson 286 PLUS Manuel D’Utilisation

Write down the error message and give it to your dealer when
reporting a problem.

If the error is serious, the computer cancels further 

halts system initialization. The error message remains on the

screen and the computer locks up. If this happens, contact your
dealer as soon as possible. Report this information and both the
error message and code number to your dealer.

If your computer does not start when you turn on the power,

check the following:

1.

Is the power light on? If not, remove any diskettes and turn

off the power. Check that the power cord is securely

connected to both the AC inlet on the back panel and an

electrical outlet. Replace the Startup or Reference diskette,

if necessary, and turn on the computer again.

Caution

If you turn off the computer for any reason, always wait at
least five seconds before turning it back on. You can

damage the computer if you turn it off and on rapidly.

the power light still does not come on, check the

electrical outlet for power. Turn off your computer and

unplug the power cord from the wall outlet. Plug a lamp into
the outlet, and turn it on to see if the outlet supplies power.

3.

If the electrical outlet is working and all the connections are
secure but your computer still won’t start, call your dealer.

Note

If the computer starts but you can’t see anything on the

screen, see “Monitor Problems,” below.

Troubleshooting D-3