Emerson SAG581126000 Manuel D’Utilisation

SAG581126000 

System Application Guide 

Issue AD, November 23, 2009 

Spec. No. 581126000 (Model 700

NVBA

) 

Page 78 of 123 

 

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy 

Systems, North America, Inc.  Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited. 

♦  Each circuit breaker (as listed in 

) plugs into one, two, or three mounting position(s) on a 

Distribution Bus Module containing Bullet Nose-type distribution positions. 

♦  A single fuseholder provides for installation of a 3 to 100 ampere Bussmann TPS-type or Littelfuse 

TLS-type fuse (as listed in 

).  This fuseholder plugs into a single mounting position on a 

Distribution Bus Module containing Bullet Nose-type distribution positions.  This fuseholder provides a 
GMT-A alarm type fuse, which operates open to provide an alarm indication if the associated distribution 
fuse opens. 

Load should not exceed 80% of device rating. 

Install distribution devices from left to right, starting with the highest capacity and working to the lowest 
capacity. 

1)  Order circuit breakers as required per 

. 

2)  Order fuses as required per 

.  For each fuse 

ordered, also order one (1) P/N 117201 bullet nose-type fuseholder. 

3)  When ordering 125A, 150A, 200A, or 250A circuit breakers, associated crimp lugs must be ordered from 

. 

Bullet Nose-Type

Fuseholder, P/N 117201

(includes Fuseholder, Alarm Fuse,

and Alarm Fuse Safety Cover)

TPS/TLS
Fuse

Alarm Fuse
Replacement
P/N 248610301

Safety Fuse Cover
Replacement
P/N 248898700

Bullet Nose-Type Circuit Breaker