Emerson ATCA-7150 Manuel D’Utilisation
Installation of the RTM-ATCA-7150
ATCA-7150 and RTM-ATCA-7150 Getting Started (6806800G42B)
59
7. Insert the FC daughter card in RTM-ATCA-7150 by facing the daughter card at an
angle of 45° to the RTM. Align the daughter card connector with the connector on
RTM-ATCA-7150, and the daughter card positioning holes with the plastic supports
on RTM-ATCA-7150. Exert even power downwards until the daughter card
connector is fully inserted into the connector on RTM-ATCA-7150 and the daughter
card is fastened by the plastic latches. See step 3 in the figure above.
RTM-ATCA-7150, and the daughter card positioning holes with the plastic supports
on RTM-ATCA-7150. Exert even power downwards until the daughter card
connector is fully inserted into the connector on RTM-ATCA-7150 and the daughter
card is fastened by the plastic latches. See step 3 in the figure above.
8. Install RTM-ATCA-7150 whose FC daughter card is replaced. For more information
.
After replacement, check if RTM-ATCA-7150 can be powered on and work normally. Use the
optical fibre to connect RTM-ATCA-7150 to the external storage system. Check if RTM-ATCA-
7150 can transmit data normally and monitor whether the FC status indicator is normal.
optical fibre to connect RTM-ATCA-7150 to the external storage system. Check if RTM-ATCA-
7150 can transmit data normally and monitor whether the FC status indicator is normal.
2.7
Installing and Removing the RTM-ATCA-7150
2.7.1
Installing RTM-ATCA-7150
Product Damage
You can install RTM-ATCA-7150 into a system if the front blade is already installed or if it is
not installed. In case the front blade is already installed, its payload has to be powered down
first.
You can install RTM-ATCA-7150 into a system if the front blade is already installed or if it is
not installed. In case the front blade is already installed, its payload has to be powered down
first.