Spectrum Brands 72A-196BAREM Series Manuel D’Utilisation

Installation and Operation Manual

Date: 6/02/2008

13

27-0027-0111

SCI P/N:  72A-196BAREM Series
 

   72A-190BQREM Series

Connections and Installation

Select 9 to exit the configuration mode without saving any changes, or

select 10 to exit and save all changes.  All values are stored in 

nonvolatile RAM.  The LAN Module will automatically reset, but the state 

of the PDU outputs will not be affected. 

Run “digi_dev_disc.exe” utility to set up unit’s IP, if necessary. These are 

part of the LAN tools.

Locate the update file.

A.      If any network setting(s) on the LAN module are changed, you  

 

must click <Restart device> to apply the changes.

B.

Place the update file “image.bin” in C:\release.

C. 

In command window, navigate to C:\release directory. 

 

Type “ftp <IP Address>”.

D. 

Then log-in (User name is “root”, and password default is “1234”.)

E. 

Type “binary” and press [Enter].

F. 

Type “put image.bin” and press [Enter].  **Wait for the 

 

completion message** Do not interrupt download.

G. 

Type “quit” after the “Transfer Complete” message appears. It may  

 

take up to 1 minute, including PDU reboot.

H. 

In “C:\release\bin”, type “ping <IP Address> -t” until the 

 

communication is re-established. Press [Ctrl+C] to exit ping.