Panasonic PT-AE1000U Manuel D’Utilisation

You can switch automatic adjustment of the lamp and 
the lens iris on/off.

• ON:

Automatic adjustment

• OFF:

No adjustment

You can monitor whether or not the luminance level of 
the input signal is in the recommended range by 
displaying it in the waveform monitor. If the waveform is 
not in the range, adjust it for the best quality. See 
“Adjusting the waveform of the input signal” on page 24.

1. Press F G to move to the required waveform 

style.

2. Press ENTER to select.

 

The WAVEFORM MONITOR will be 
displayed.

3. Adjust the WAVEFORM MONITOR.

 

See “Adjusting the waveform of the input 
signal” on page 24.

From the ADVANCED MENU, you can perform more 
detailed image adjustment manually.

J

You can adjust linear intensity at 3 levels. Press 
I H to increase/decrease 1 point.

 

Setting range: -8 to +8

J

You can adjust the amount of contrast in RGB 
colors individually. Press I H to 
increase/decrease 1 point.

 

Setting range: -32 to +32

J

You can adjust the brightness in RGB colors 
individually. Press I H to increase/decrease 
1 point.

 

Setting range: -16 to +16

J

You can manage your own defined color settings. 
See “Setting your own color profile” on page 26.

J

You can switch the automatic noise reduction 
system on/off. Press I H to select the required 
setting.
• ON:

Automatic noise reduction

• OFF:

No noise reduction

OFF

FULL SCAN(Y)

FULL SCAN(R)

FULL SCAN(G)

FULL SCAN(B)

SINGLE LINE SCAN(Y)

SINGLE LINE SCAN(R)

SINGLE LINE SCAN(G)

SINGLE LINE SCAN(B)

MONITOR POSITION

UPPER LEFT

0

0

0

0

0

0

0

0

0

NOTE:
 

Applying noise reduction may affect image quality.

PT-AE1000U.book  Page 32  Monday, October 16, 2006  1:40 PM