Toyota pmn Manuel D’Utilisation
49
15. Installation engine compartment lower
1. APPLY LIQUID GASKET TO OIL PAN.
(a) Apply the liquid gasket onto the clean sump surface.
NOTICE: Liquid gasket 08826-00080
2. INSTALL OIL PAN.
(a) Within 3 minutes after applying the liquid gasket install
the oil-sump onto the engine using the 14 bolts and 2
nuts.
nuts.
R
: Bolt (14 pcs.)
R
: Nut (2 pcs.)
(b) Tighten the bolts and nuts carefully first with 5 Nm and
after with the final torque.
Torque: 9 Nm
Torque: 9 Nm
(c) Install plastic flywheel cover.
3. INSTALL OIL PRESSURE SWITCH EXTENSION.
(a) Remove oil pressure switch.Use Special tool (SST
09816-30010)
R
: Oil pressure switch
(b) Install the oil-pressure switch extension into the oil
filter housing using Loctite 243.
K: Extension(15-2)
Torque: 13 Nm
K: Extension(15-2)
Torque: 13 Nm
(c) Remove oil filter.Use special tool (SST 09228-06501)
U: Oil filter
(d) Install a new oil filter.
K: Oil filter (26-7)
4. INSTALL OIL PRESSURE SWITCH EXTENSION
BOLT.
(a) Route the oil pressure tube towards the adapter.
(b) Insert the hollow bolt with the 2 copper seal rings into
(b) Insert the hollow bolt with the 2 copper seal rings into
the adapter using Loctite 243.
NOTICE: When applying the correct torque
NOTICE: When applying the correct torque
onto the hollow-bolt ensure that the
adapter is secured against further
rotation and that the pressure tube is
pointing into the correct direction.
adapter is secured against further
rotation and that the pressure tube is
pointing into the correct direction.
K: Hollow-bolt (15-1)
K: Seal rings (2 pcs.) (15-3)
Torque: 20 Nm
K: Seal rings (2 pcs.) (15-3)
Torque: 20 Nm
R
14x
R
K
K
U
K
K
K