Toyota pmn Manuel D’Utilisation

50

(a) Install the oil pressure switch into the adapter using 

Loctite 243. Use SST 09816-30010

R

: Pressure switch

Torque: 13 Nm

(b) Connect the oil pressure switch connector to the 

pressure switch.
NOTICE: Turn oil filter until the o-rings touches the 

(a) Position the intercooler assembly underneath the 

gearbox.
K: intercooler (7-1)

(b) Install the bolt M8 x 12 into the gearbox side to fix the 

bracket. (hand tighten)
K: Bolt (7-6)

(c) Install the bolt M8 x 20 into the gearbox front to fix the 

bracket (hand tighten)
K: Bolt (7-8)

(a) Position intercooler inlet pipe, 2 hoses and 4 hose 

clamps.
K: intercooler inlet pipe (6-1)
K: Hose turbo side (6-2)
K: Hose intercooler side (6-3)
K: Clamp (4 pcs.) (6-4)

(b) Tighten outer hose clamps on turbo charger side and 

intercooler side.
Torque: 3 Nm

(c) Pull inlet pipe 5 mm out of the hoses on both sides and 

hand tighten inner clamps.

(d) Install the inlet pipe with a bolt to the engine.

K: Bolt (6-5)
Torque: 12 Nm

(e) Tighten the inner hose clamps.

Torque: 3 Nm