Nortel Networks CVX 600 Manuel D’Utilisation
Tandem CVX to RAS CVX Crossover Cable
A-14
296-1011-202 Rel. 5.0, Doc. Rev. 02.01
CVX 600 Hardware Installation Guide
Tandem CVX to RAS CVX Crossover Cable
Introduction
If you need a crossover cable to send data from a tandem CVX 600 to a RAS CVX
600, you must build the cable using the information in this section. Nortel
Networks does not supply this cable.
600, you must build the cable using the information in this section. Nortel
Networks does not supply this cable.
Tool and Parts Needed
To make the cable, you need the following items:
•
CAT 5-conductor cable
•
(2) RJ-45 connectors
•
RJ-45 crimp tool
Pin Data
To assemble the cable, you also need to know the pin connections. The following
table provides the tandem CVX switch to RAS CVX switch pin data.
table provides the tandem CVX switch to RAS CVX switch pin data.
From
To
Pin 1
Pin 4
Pin 2
Pin 5
Pin 4
Pin 1
Pin 5
Pin 2