Manualsbrain.com
  1. Manuels
  2. Marques
  3. Raritan Computer
  4. 4.7
  5. Manuel D’Utilisation

Raritan Computer 4.7 Manuel D’Utilisation

Télécharger
Page de 257
 
 
11
 
The Paragon switch and all devices you want to connect to it must 
be unplugged and turned OFF prior to installation. 
In This Chapter 
 
 
Basic Installation 
Ensure that you have turned OFF all servers and Paragon II devices 
prior to installation. Installing a basic Paragon II system involves these 
steps. 
  Step (A): Connect Stacking Units to a Main Unit (Optional) 
  Step (B): Connect User Stations to the Main Unit 
  Step (C): Connect Servers to Paragon II Main and Stacking 
Units 
Note: Users and servers can be located up to 1000 feet (304 m) apart. 
However, try to limit the cable length between the CIM and Paragon II 
switch to less than 100 feet (30.5 m) for optimal video quality, and if 
possible, limit the total cable length between the user and target server 
to less than 500 feet (152 m) for good video quality. 
 
Step (A): Connect Stacking Units 
If your Main Unit supports the use of Stacking Units, such as 
P2-UMT832M, you can connect compatible Stacking Units to expand the 
number of channel ports in the system. 
 
To connect one or more Stacking Units 
1.  Connect the power cord to the Main Unit. 
2.  Connect the power cord to the Stacking Unit. 
3.  Depending on the Stacking Unit you purchased, use one or two 
stacking cables to connect the Stacking Unit to the Main Unit.   
a.  For connecting P2-UMT832S to P2-UMT832M: 
Chapter 2 
Quick Start