Raritan Computer 4.7 Manuel D’Utilisation

Chapter 2: Quick Start 
 

  Plug one end of a stacking cable into the port—Expansion 

Port Out—on the Stacking Unit.   

  Plug the other end of the cable into the port—Expansion 

Port—on the Main Unit. 

 

b.  For connecting P2-UMT1664S to P2-UMT1664M: 

  Plug one end of the stacking cable into "Expansion Port Out 

A" on the Stacking Unit and the other end of the cable into 
the lower "Expansion Port In" on the Main Unit. 

  Plug one end of the other stacking cable into "Expansion Port 

Out B" on the Stacking Unit and the other end of the cable 
into the upper "Expansion Port In" on the Main Unit. 

4.  (Optional) You can cascade up to three P2-UMT832S Stacking Units 

for a P2-UMT832M Main Unit. To add more Stacking Units, follow 
this procedure: 

a.  Plug one end of a stacking cable into the port—Expansion Port 

In—on the last Stacking Unit connected to the Main Unit. 

b.  Plug the other end of the cable into the port—Expansion Port 

Out—on the newly added Stacking Unit. 

c.  Connect a power cord to the newly added Stacking Unit. 

d.  Repeat Steps a to c if you want to add one more Stacking Unit. 

5.  Turn on all Paragon II devices. 

6.  Set the total number of connected Stacking Units on the front panel 

of the Main Unit. 

a. Press 

the 

FUNC button to activate the Function Menu. 

b. Press 

the   and    buttons to select "Stacking Support." 

c. Press 

the 

ENT button to confirm your selection. 

d. Press 

the   and    buttons to select the total number of 

Stacking Units—3 maximum for P2-UMT832M or 1 maximum for 
P2-UMT1664M. 

e. Press 

the 

ENT button to save the setting.