Q-Logic 59021-05 Manuel D’Utilisation

Page de 180
B – Command Line Interface
Set Config Command
59021-05 A
B-27
switch
Initiates an editing session in which to change switch configuration settings. The 
system displays each parameter one line at a time and prompts you for a value. 
For each parameter, enter a new value or press the Enter key to accept the 
current value shown in brackets. 
Table B-8. Set Config Switch Parameters 
Parameter
Description
AdminState
Switch administrative state: online, 
offline, or diagnostics
BroadcastEnable
Enables (True) or disables (False) 
forwarding of broadcast frames.
InbandEnabled
Enables (True) or disables (False) the 
ability to manage the switch over an 
ISL.
DefaultDomainID
Default domain ID setting
DomainIDLock
Prevents (True) or allows (False) 
dynamic reassignment of the 
domain ID.
SymbolicName
Descriptive name
R_T_TOV
Receiver Transmitter Timeout Value. 
Specifies the number of milliseconds a 
port is to wait to receive a response 
from another port. The default is 100.
R_A_TOV
Resource Allocation Timeout Value. 
The number of milliseconds the switch 
waits to allow two ports to allocate 
enough resources to establish a link. 
The default is 10000.
E_D_TOV
Error Detect Timeout Value. The 
number of milliseconds a port is to wait 
for errors to clear. The default is 2000.
FS_TOV
Fabric Stability Timeout Value. The 
default is 5000 msec.
DS_TOV
Distributed Services Timeout Value 
(Management Server, Name Server). 
The default is 5000 msec.