Q-Logic 59021-05 Manuel D’Utilisation

B – Command Line Interface

Show Log Command

B-58

59021-05 A

Displays the contents of the log or the parameters used to create entries in the 
log. The log contains a maximum of 200 entries. When the log reaches its entry 
capacity, subsequent entries overwrite the existing entries, beginning with the 
oldest.

User

component
level
options
port
settings

component
Displays the components currently being monitored for events.

level
Displays the event severity level needed to create an entry in the log. If the 
severity level occurs on a port or on a component which is not defined, no entry is 
made in the log.

options
Displays the options used to set the component and log level attributes.

port
Displays the ports being monitored for events. If an event occurs which is of the 
defined level and on a defined component, but not on a defined port, no entry is 
made in the log.

settings
Displays the current settings for component, level and port. This command is 
equivalent to executing the following commands separately: Show Log 
Component, Show Log Level, and Show Log Port.

The following is an example of the Show Log Component command:

SANbox2 #> show log component

  Current setting(s) for log component: NameServer

The following is an example of the Show Log Level command:

SANbox2 #> show log level

  Current setting(s) for log level: Info