Q-Logic 59021-05 Manuel D’Utilisation
B – Command Line Interface
Shutdown Command
59021-05 A
B-65
Shutdown Command
Terminates all data transfers on the switch at convenient points and closes the
Telnet session. Always power cycle the switch after entering this command.
Telnet session. Always power cycle the switch after entering this command.
Authority
Admin
Syntax
shutdown
Notes
Always use this command to effect an orderly shut down before removing power
from the switch. Failure to do so could corrupt the flash memory and the switch
configuration.
from the switch. Failure to do so could corrupt the flash memory and the switch
configuration.