Q-Logic 59022-11 A 4-13 Manuel D’Utilisation
A – Command Line Interface
Set Config Command
59022-11 A
A-61
0
SymbolicPortName
Descriptive name for the port. The name can be up to 32
characters excluding #, semicolon (;), and comma (,). The
default is Port n where n is the port number.
characters excluding #, semicolon (;), and comma (,). The
default is Port n where n is the port number.
ALFairness
Arbitration loop fairness. Enables (True) or disables (False)
the switch’s priority to arbitrate on the loop. The default is
False.
the switch’s priority to arbitrate on the loop. The default is
False.
DeviceScanEnabled
Enables (True) or disables (False) the scanning of the
connected device for FC-4 descriptor information during
login. The default is True.
connected device for FC-4 descriptor information during
login. The default is True.
ForceOfflineRSCN
Enables (False) or disables (True) the immediate
transmission of RSCN messages when communication
between a port and a device is interrupted. If enabled, the
RSCN message is delayed for 200 ms for locally attached
devices and 400 ms for devices connected through other
switches. The default is False. This parameter is ignored if
IOStreamGuard is enabled.
transmission of RSCN messages when communication
between a port and a device is interrupted. If enabled, the
RSCN message is delayed for 200 ms for locally attached
devices and 400 ms for devices connected through other
switches. The default is False. This parameter is ignored if
IOStreamGuard is enabled.
ARB_FF
Send ARB_FF (True) instead of IDLEs (False) on the loop.
The default is False.
The default is False.
InteropCredit
Interoperability credit. The number of buffer-to-buffer credits
per port. 0 means the default (12) is unchanged. Changing
interoperability credits is necessary only for E_Ports that are
connected to non-FC-SW-2-compliant switches. Contact your
authorized maintenance provider for assistance in using this
feature.
per port. 0 means the default (12) is unchanged. Changing
interoperability credits is necessary only for E_Ports that are
connected to non-FC-SW-2-compliant switches. Contact your
authorized maintenance provider for assistance in using this
feature.
ExtCredit
Extended credits. The number of port buffer credits that this
port can acquire from donor ports. The default is 0.
port can acquire from donor ports. The default is 0.
FANEnable
Fabric address notification. Enables (True) or disables
(False) the communication of the FL_Port address, port
name, and node name to the logged-in NL_Port. The default
is True.
(False) the communication of the FL_Port address, port
name, and node name to the logged-in NL_Port. The default
is True.
AutoPerfTuning
Automatic performance tuning for FL_Ports only. The default
is True.
is True.
If AutoPerfTuning is enabled (True) and the port is an
FL_Port, MFSEnable is automatically enabled.
LCFEnable and VIEnable are overridden to False.
FL_Port, MFSEnable is automatically enabled.
LCFEnable and VIEnable are overridden to False.
If AutoPerfTuning is disabled (False), MFSEnable,
LCFEnable, and VIEnable retain their original values.
LCFEnable, and VIEnable retain their original values.
Table A-18. Set Config Port Parameters
Parameter
Description