Q-Logic 5600 Manuel D’Utilisation

4 – Managing Switches

Displaying Hardware Status

59097-02 B

4-45

A

To install firmware, do the following:

1.

In the faceplate display, open the Switch menu and select Load Firmware.

2.

In the Firmware Upload dialog, click the Browse button to browse and select 
the firmware file to be uploaded.

3.

Click the Start button to begin the firmware load process. You will be shown 
a message warning you that the switch will be reset in order to activate the 
firmware.

4.

SANsurfer Switch Manager prompts you to activate the new firmware using 
a hot (non-disruptive) reset, if possible. Click the OK button to reset the 
switch and activate the new firmware.

To display a summary of the hardware status information in a popup text box, rest 
the cursor over the chassis LED cluster in the faceplate display. 
„

Input Power LED - indicates the voltage status of the switch.

„

Heartbeat LED - indicates the status of the internal switch processor and the 
results of the POST.

„

System Fault LED - indicates an over temperature condition or a Power On 
Self Test error.