Q-Logic 5600 Manuel D’Utilisation

A – Command Line Interface

Zone Command

A-132

59097-02 B

S

Deletes the specified zone given by [zone] from the zoning database. If the zone 
is a component of the active zone set, the zone will not be removed from the 
active zone set until the active zone set is deactivated.

Displays a list of all zones and the zone sets of which they are components. This 
keyword does not require an Admin session.

Displays all members of the zone given by [zone]. This keyword does not require 
an Admin session.

Removes the ports/devices given by [member_list] from the zone given by [zone]. 
Use a <space> to delimit aliases and ports/devices in [member_list]. 
[member_list] can have any of the following formats:
„

Domain ID and port number pair (Domain ID, Port Number). Domain IDs can 
be 1–-239; port numbers can be 0–-255.

„

6-character hexadecimal device Fibre Channel address (hex)

„

16-character hexadecimal worldwide port name (WWPN) with the format 
xx:xx:xx:xx:xx:xx:xx:xx.

„

Alias name

Renames the zone given by [zone_old] to the zone given by [zone_new].

Specifies the zone type given by [zone_type] to be assigned to the zone name 
given by [zone]. If you omit the [zone_type], the system displays the zone type for 
the zone given by [zone]. [zone_type] can be one of the following:

Name server zone

Access control list hard zone. This keyword is case sensitive.

Displays all zone sets of which the zone given by [zone] is a component. This 
keyword does not require an Admin session.