Q-Logic 5600 Manuel D’Utilisation
3 – Managing Fabrics
Zoning a Fabric
3-44
59097-02 B
S
3.7.3
Managing the Zoning Database
Managing the zoning database consists of the following:
3.7.3.1
Editing the Zoning Database
To edit the zoning database for a particular switch, open the Zoning menu from
the faceplate display and select Edit Zoning to open the Edit Zoning dialog
shown in
the faceplate display and select Edit Zoning to open the Edit Zoning dialog
shown in
. Changes can only be made to inactive zone sets, which are
stored in flash (non-volatile) memory and retained after resetting a switch.
Figure 3-15. Edit Zoning Dialog
To apply zoning to a fabric, choose a zone set and activate it. When you activate a
zone set, the switch distributes that zone set and its zones, excluding aliases, to
every switch in the fabric. This zone set is known as the active zone set.
zone set, the switch distributes that zone set and its zones, excluding aliases, to
every switch in the fabric. This zone set is known as the active zone set.
Port/Device
Tree
Zone Sets
Tree