Q-Logic 8C/16 Manuel D’Utilisation

A – Command Line Interface

Config Command

59022-06 A

A-9

Q

The following is an example of how to create a backup file (configdata) and 
download the file to the workstation.

SANbox2 #> admin start

SANbox2 (admin) #> config backup

SANbox2 (admin) #> admin end

SANbox2 #> exit

#>ftp symbolic_name or ip_address

user: images

password: images

ftp> bin

ftp> get configdata

ftp> quit

The following is an example of how to upload a configuration backup file 
(configdata) from the workstation to the switch, and then restore the configuration.

#> ftp symbolic_name or ip_address

user: images

password: images

ftp> bin

ftp> put configdata

ftp> quit

SANbox2 #> admin start

SANbox2 (admin) #> config restore

The switch will be reset after restoring the configuration.

  Please confirm (y/n): [n] y

  Alarm Msg: [Tue Jun 10 09:25:56.938 2003][A1005.0021][SM][Configuration is being      

restored -  this could take several minutes !]

  Alarm Msg: [Tue Jun 10 09:26:19.266 2003][A1000.000A][SM][The switch will be 

reset in 3 seconds due to a config restore]

SANbox2 (admin) #> 

  Alarm Msg: [Tue Jun 10 09:26:22.296 2003][A1000.0005][SM][The switch is being 

reset]

Good bye.