Q-Logic 8C/16 Manuel D’Utilisation
A – Command Line Interface
Zoning Command
Zoning Command
A-84
59022-06 A
Q
Zoning Command
Opens a Zoning Edit session in which to create and manage zone sets and zones.
Refer to the
Refer to the
and the
Authority
Admin. The List keyword is available with User authority.
Syntax
zoning
active
cancel
clear
edit
history
limits
list
restore
save
cancel
clear
edit
history
limits
list
restore
save
Keywords
active
Displays membership information for the active zone set including member zones
and zone members.
cancel
Closes the current Zoning Edit session. Any unsaved changes are lost.
clear
Clears all inactive zone sets from the volatile edit copy of the zoning database.
This keyword does not affect the non-volatile zoning database. However, if you
enter the Zoning Clear command followed by the Zoning Save command, the non-
volatile zoning database will be cleared from the switch.
Displays membership information for the active zone set including member zones
and zone members.
cancel
Closes the current Zoning Edit session. Any unsaved changes are lost.
clear
Clears all inactive zone sets from the volatile edit copy of the zoning database.
This keyword does not affect the non-volatile zoning database. However, if you
enter the Zoning Clear command followed by the Zoning Save command, the non-
volatile zoning database will be cleared from the switch.
edit
Opens a Zoning Edit session.
history
Displays a history of zoning modifications including the following:
Opens a Zoning Edit session.
history
Displays a history of zoning modifications including the following:
Time of the most recent zone set activation or deactivation and the user who
performed it
performed it
Time of the most recent modifications to the zoning database and the user
who made them.
who made them.
Checksum for the zoning database
Note:
The preferred method for clearing the zoning database from the switch
is the Reset Zoning command.
is the Reset Zoning command.