Q-Logic 8C/16 Manuel D’Utilisation
4 – Managing Switches
Restoring the Factory Default Configuration
Restoring the Factory Default Configuration
4-30
59022-06 A
Q
4.13
Restoring the Factory Default Configuration
You can restore the switch and port configuration settings to the factory default
values. To restore the factory configuration on a switch, open the Switch menu
and select Restore Factory Defaults.
values. To restore the factory configuration on a switch, open the Switch menu
and select Restore Factory Defaults.
lists the factory default switch
configuration settings.
Restoring the switch to the factory default configuration does not restore the
account name and password settings. To restore user accounts, you must select
Reset Password File option in the maintenance menu. Refer to “Recovering a
Switch” in the Installation Guide for your switch for information about maintenance
mode and the maintenance menu.
account name and password settings. To restore user accounts, you must select
Reset Password File option in the maintenance menu. Refer to “Recovering a
Switch” in the Installation Guide for your switch for information about maintenance
mode and the maintenance menu.
Table 4-10. Factory Default Configuration Settings
Setting
Value
Symbolic name
SANbox2
Administrative state
Online
Domain ID
1
Domain ID Lock
False
Inband Management
True
Broadcast Support
Enable
Resource Allocation Timeout (RA TOV)
10000 milliseconds
Error Detect Timeout (ED TOV)
2000 milliseconds
IP address
10.0.0.1
Subnet mask address
255.0.0.0
Gateway address
10.0.0.254
Network Discovery
Static
Remote Logging
False
Remote Logging host IP address
10.0.0.254
Contact
Undefined
Location
Undefined
Trap enabled
False
Trap port
162
Trap address
Trap 1: 10.0.0.254; Traps 2-5: 0.0.0.0