Q-Logic SANBOX2-16 Manuel D’Utilisation
3 – Managing Fabrics
Zoning a Fabric
Zoning a Fabric
3-50
59022-11 A
0
3.7.5
Managing Zones
Managing zones involves the following:
3.7.5.1
Creating a Zone in a Zone Set
When a zone is created, its zone type is soft. To change the zone type to a hard
zone, refer to
zone, refer to
for more information. Refer to
for information on zone types (soft and hard). To create a
zone in a zone set, do the following:
1.
Open the Zoning menu, and select Edit Zoning to open the Edit Zoning
dialog.
dialog.
2.
Select a zone set.
3.
Open the Edit menu and select Create a Zone.
4.
In the Create a Zone dialog, enter a name for the new zone, and click the
OK button. The new zone name is displayed in the Zone Sets dialog. A zone
name must begin with a letter and be no longer than 64 characters. Valid
characters are 0-9, A-Z, a-z, _, ^, $, and -.
OK button. The new zone name is displayed in the Zone Sets dialog. A zone
name must begin with a letter and be no longer than 64 characters. Valid
characters are 0-9, A-Z, a-z, _, ^, $, and -.
Note:
Changes that you make to the zoning database are limited to the
managed switch and do not propagate to the rest of the fabric. To
distribute changes to configured zone sets fabric wide, you must edit
the zoning databases on the individual switches.
managed switch and do not propagate to the rest of the fabric. To
distribute changes to configured zone sets fabric wide, you must edit
the zoning databases on the individual switches.
Note:
If you enter the name of a zone that already exists in the
database, the SANsurfer Switch Manager application will ask if
you would like to add that zone and its membership to the zone
set.
database, the SANsurfer Switch Manager application will ask if
you would like to add that zone and its membership to the zone
set.