Q-Logic SANBOX2-16 Manuel D’Utilisation
5 – Managing Ports
Displaying Port Information
Displaying Port Information
5-8
59022-11 A
0
Administrative Port State
The port state (Online, Offline,
Diagnostics, or Down) which has been set
by the user. This state may be different
from the configured administrative state if
the user has not saved it in the switch
configuration. This state is used at the time
it is set to try to set the port operational
state. This value is not persistent and will
be lost on a switch reset.
Diagnostics, or Down) which has been set
by the user. This state may be different
from the configured administrative state if
the user has not saved it in the switch
configuration. This state is used at the time
it is set to try to set the port operational
state. This value is not persistent and will
be lost on a switch reset.
Operational Port State
The port state that is currently active. This
value may be different from the
administrative port state, for example due
to an error condition.
value may be different from the
administrative port state, for example due
to an error condition.
Configured Administrative Port State
The port state (Online, Offline,
Diagnostics, or Down) which is saved in
the switch configuration, either by the user
or at the factory. This value is persistent; it
will be maintained during a switch reset,
and will be used after a reset to set the
port operational state.
Diagnostics, or Down) which is saved in
the switch configuration, either by the user
or at the factory. This value is persistent; it
will be maintained during a switch reset,
and will be used after a reset to set the
port operational state.
Logged In
Indicates whether logged in or not.
E Port Connection Status
E_Port connection status. Status can be
None, Connecting, Connected or Isolated.
None, Connecting, Connected or Isolated.
E Port Isolation Reason
Why E_Port is isolated.
MFS Mode
Multiple Frame Sequence bundling status.
I/O Stream Guard
RSCN message suppression status.
Status can be enabled, disabled, or
automatically determined by the switch.
Status can be enabled, disabled, or
automatically determined by the switch.
Administrative Port Speed
The speed requested by the user.
Operational Port Speed
The speed actually being used by the port.
Max Credits
The maximum number of credits granted
to a port that can be used when extending
port credits.
to a port that can be used when extending
port credits.
Device Scan
Device scan status. Enabled means the
switch queries the connected device
during login for FC-4 descriptor
information.
switch queries the connected device
during login for FC-4 descriptor
information.
Table 5-6. Port Information Data Window Entries (Continued)
Entry
Description