Q-Logic SANBOX2-16 Manuel D’Utilisation

A – Command Line Interface
Config Command

A-16

59022-11 A

0

Manages the Fibre Channel configurations on a switch. For information about 
setting the port and switch configurations, refer to the 

Admin session for all keywords except List

activate [config_name]
backup
cancel
copy [config_source] [config_destination]
delete [config_name]
edit [config_name]
list
restore
save [config_name]

activate [config_name]
Activates the configuration given by [config_name]. If you omit [config_name], the 
currently active configuration is used. Only one configuration can be active at a 
time.
backup
Creates a file named configdata, which contains the system configuration 
information. To download this file, open an FTP session, log in with account 
name/password of “images” for both, and type “get configdata”. Refer to 

.

cancel
Terminates the current configuration edit session without saving changes that 
were made.
copy [config_source] [config_destination]
Copies the configuration given by [config_source] to the configuration given by 
[config_destination]. The switch supports up to 10 configurations including the 
default configuration.
delete [config_name]
Deletes the configuration given by [config_name] from the switch. You cannot 
delete the default configuration (Default Config) nor the active configuration.
edit [config_name]
Opens an edit session for the configuration given by [config_name]. If you omit 
[config_name], the currently active configuration is used.
list
Displays a list of all available configurations on the switch. This keyword does not 
require an admin session.