Q-Logic SANBOX2-16 Manuel D’Utilisation

A – Command Line Interface

Show Command

59022-11 A

A-89

0

log [option]
Displays log entries. Refer to the 

. The log 

is cleared when the switch is reset or power cycled.
lsdb
Displays Link State database information 
mem [count]
Displays information about memory activity for the number of seconds given by 
[count]. If you omit [count], the value 1 is used. Displayed memory values are in 
1K block units.

ns [option]
Displays name server information for the specified [option]. If you omit [option], 
name server information for the local domain ID is displayed. [option] can have the 
following values:

all
Displays name server information for all switches and ports.
[domain_id]
Displays name server information for the switch given by [domain_id]. 
[domain_id] is a switch domain ID.
[port_id]
Displays name server information for the port given by [port_id]. [port_id] is a 
port Fibre Channel address.

pagebreak
Displays the current pagebreak setting. The pagebreak setting limits the display of 
information to 20 lines (On) or allows the continuous display of information without 
a break (Off).
perf [option]
Displays performance information for all ports. Refer to the 

                                                            

This keyword will display memory activity updates until [count] is 
reached – it cannot be interrupted. Therefore, avoid using large 
values for [count].