3com WX3000 Manuel D’Utilisation

 

1-6 

Enter system view  

— 

Enter Ethernet port view  

interface interface-type 
interface-number 

— 

Enable flow control on the 
Ethernet port  

flow-control 

Required 

By default, flow control is not 
enabled on a port.  

 

Follow these steps to configure access port attribute: 

Enter system view  

— 

Enter Ethernet port view  

interface interface-type 
interface-number 

— 

Configure the link type for the 
port as access  

port link-type access 

By default, the link type for the 
port is access.  

Add the current access port into 
the specified VLAN  

port access vlan vlan-id 

Optional 

 

Follow these steps to configure hybrid port attribute: 

Enter system view  

— 

Enter Ethernet port view  

interface interface-type 
interface-number 

— 

Set the link type for the port as 
hybrid  

port link-type hybrid 

Required 

Set the default VLAN ID for the 
hybrid port  

port hybrid pvid vlan vlan-id 

Optional 

By default, the VLAN of a 
hybrid port is VLAN 1.  

Add the current hybrid port into 
the specified VLAN  

port hybrid vlan vlan-id-list 
{ tagged | untagged } 

Optional 

For a hybrid port, you can 
configure to tag the packets of 
specific VLANs, based on 
which the packets of those 
VLANs can be processed in 
differently ways. 

 

Follow these steps to configure trunk port attribute: