3com WX3000 Manuel D’Utilisation

 

1-7 

Configure a description for 
the aggregation group 

link-aggregation group agg-id 
description agg-name 

Optional 

By default, an aggregation group 
has no description. 

Enter Ethernet port view 

interface interface-type 
interface-number 

— 

Add the Ethernet port to the 
aggregation group 

port link-aggregation group 
agg-id 

Required 

 

Note that: 

1)  When creating an aggregation group: 

z 

If the aggregation group you are creating already exists but contains no port, its type will change to 

the type you set. 

z 

If the aggregation group you are creating already exists and contains ports, the possible type 

changes may be: changing from dynamic or static to manual, and changing from dynamic to static; 

and no other kinds of type change can occur. 

z 

When you change a dynamic/static group to a manual group, the system will automatically disable 

LACP on the member ports. When you change a dynamic group to a static group, the system will 

remain the member ports LACP-enabled. 

2)  When a manual or static aggregation group contains only one port, you cannot remove the port 

unless you remove the whole aggregation group. 

You can create a static LACP aggregation group, or remove an existing static aggregation group (after 

that, the system will re-aggregate the original member ports in the group to form one or more dynamic 

aggregation groups.). 

For a static aggregation group, a port can only be manually added/removed to/from the static 

aggregation group. 

 

When you add an LACP-enabled port to a manual aggregation group, the system will automatically 

disable LACP on the port. Similarly, when you add an LACP-disabled port to a static aggregation group, 

the system will automatically enable LACP on the port. 

 

Follow these steps to configure a static LACP aggregation group: 

Enter system view 

— 

Create a static aggregation 
group 

link-aggregation group agg-id 
mode static 

Required