3com WX3000 Manuel D’Utilisation

 

4-3 

Figure 4-1 Web interface of the access controller engine 

 

 

3)  Set up a Web configuration environment, as shown in 

. 

Figure 4-2 Set up a Web configuration environment 

 

 

 

4)  Log in to the switching engine through IE. Launch IE on the Web-based network management 

terminal (your PC) and enter http://192.168.0.101 in the address bar. (Make sure a route is 

available between the Web-based network management terminal and the switching engine.) 

5)  When the login authentication interface (as shown in 

) appears, enter the user name and 

the password configured in step 2 and click Login to bring up the main page of the Web-based 

network management system. 

Figure 4-3 The login page of the Web-based network management system 

 

 

If a login banner is configured with the header command, when a user logs in through Web, the banner 

page is displayed before the user login authentication page. The contents of the banner page are the 

login banner information configured with the header  command. Then, by clicking <Continue> on the 

banner page, the user can enter the user login authentication page, and enter the main page of the 

Web-based network management system after passing the authentication. If no login banner is