3com WX3000 Manuel D’Utilisation

 

4-4 

configured by the header  command, a user logging in through Web directly enters the user login 

authentication page. 

Follow these steps to configure the login banner: 

Enter system view 

system-view 

— 

Configure the banner to be 
displayed when a user logs in 
through Web 

header login text 

Required 

By default, no login banner is 
configured. 

 

As shown in 

z 

A user logs in to the switching engine through Web.  

z 

The banner page is desired when a user logs in to the switching engine. 

Figure 4-4 Network diagram for login banner configuration 

 

 

# Enter system view. 

<device> system-view 

# Configure the banner "Welcome" to be displayed when a user logs in to the switching engine through 

Web. 

[device] header login %Welcome% 

Assume that a route is available between the user terminal (the PC) and the switching engine. After the 

above-mentioned configuration, if you enter the IP address of the switching engine in the address bar of 

the browser running on the user terminal and press <Enter>, the browser will display the banner page, 

as shown in