3com WX3000 Manuel D’Utilisation

 

5-1 

You can also log in to the switching engine from a network management station (NMS), and then 

configure and manage the switching engine through the agent module on the switch. Simple network 

management protocol (SNMP) is applied between the NMS and the agent. Refer to the SNMP-RMON 

part for related information. 

To log in to the switching engine from an NMS, you need to perform related configuration on both the 

NMS and the switching engine. 

Table 5-1 Requirements for logging in to the switching engine from an NMS 

The IP address of the VLAN interface of the switching engine is configured. 
The route between the NMS and the switching engine is reachable. (Refer to 
IP Address and Performance Operation and Routing Protocol parts for related 
information.) 

Switching engine 

The basic SNMP functions are configured. (Refer to the SNMP-RMON part for 
related information.) 

NMS 

The NMS is properly configured. (Refer to the user manual of your NMS for 
related information.) 

 

Figure 5-1 Network diagram for logging in from an NMS