3com WX3000 Manuel D’Utilisation

 

1-17 

Display test history 

display hwping history 
[ administrator-name operation-tag ] 

Display the results of the latest 
test 

display hwping results 
[ administrator-name operation-tag ] 

Available in any view

 

As shown in 

, Switch A serves as the HWPing client. A HWPing ICMP test between Switch A 

and Switch B uses ICMP to test the round trip time (RTT) for packets generated by the HWPing client to 

travel to and back from the destination.  

Figure 1-2 Network diagram for the ICMP test 

Switch  A

Switch  B

HWPing Client

IP network

10.1.1.1/8

10.2.2.2/8

 

 

z 

Configure HWPing Client (Switch A): 

# Enable HWPing client. 

<device> system-view 

[device] hwping-agent enable 

# Create a HWPing test group, setting the administrator name to "administrator" and test tag to "ICMP". 

[device] hwping administrator icmp  

# Configure the test type as icmp.  

[device-hwping-administrator-icmp] test-type icmp  

# Configure the destination IP address as 10.2.2.2.  

[device-hwping-administrator-icmp] destination-ip 10.2.2.2 

# Configure to make 10 probes per test.  

[device-hwping-administrator-icmp] count 10 

# Set the probe timeout time to 5 seconds. 

[device-hwping-administrator-icmp] timeout 5 

# Start the test.  

[device-hwping-administrator-icmp] test-enable 

# Set the maximum number of history records that can be saved to 5. 

[device-hwping-administrator-icmp] history-records 5