3com WX3000 Manuel D’Utilisation

 

1-22 

As shown in 

, Switch serves as the HWPing client, and a PC serves as the HTTP server. 

Perform a HWPing HTTP test between Switch and the HTTP server to test the connectivity and the time 

required to download a file from the HTTP server after the connection to the server is established.  

Figure 1-5 Network diagram for the HTTP test 

Switch  

HWPing Client

IP network

10.1.1.1/8

10.2.2.2/8

HTTP Server

 

 

z 

Configure HTTP Server: 

Use Windows 2003 Server as the HTTP server. For HTTP server configuration, refer to the related 

instruction on Windows 2003 Server configuration. 

z 

Configure HWPing Client (Switch): 

# Enable the HWPing client. 

<device> system-view 

[device] hwping-agent enable 

# Create a HWPing test group, setting the administrator name to "administrator" and test tag to "HTTP". 

[device] Hwping administrator http 

# Configure the test type as http.  

[device-hwping-administrator-http] test-type http 

# Configure the IP address of the HTTP server as 10.2.2.2.  

[device-hwping-administrator-http] destination-ip 10.2.2.2 

# Configure to make 10 probes per test.  

[device-hwping-administrator-http] count 10 

# Set the probe timeout time to 30 seconds. 

[device-hwping-administrator-http] timeout 30 

# Start the test.  

[device-hwping-administrator-http] test-enable 

# Display test results 

[device-hwping-administrator-http] display hwping results administrator http 

  HWPing entry(admin administrator, tag http) test result: 

      Destination ip address:10.2.2.2 

      Send operation times: 10              Receive response times: 10 

      Min/Max/Average Round Trip Time: 47/87/74 

      Square-Sum of Round Trip Time: 57044 

      Last succeeded test time: 2000-4-2 20:41:50.4 

  Extend result: