3com WX3000 Manuel D’Utilisation

 

1-7 

Figure 1-3 Network diagram for Smart Link configuration 

Switch A

GE 1/0/1

GE 1/0 /2

Switch C

Server

GE1/0/1

GE1/0/2

GE 1/0/2

PC

Switch D

Switch E

GE 1/0 /3

GE 1/0/2

GE 1/0 /1

 

 

1)  Configure a Smart Link group on Switch A and configure member ports for it. Enable the function of 

sending flush messages in Control VLAN 1. 

# Enter system view.  

<switchA> system-view 

# Enter Ethernet port view. Disable STP on GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2.  

[SwitchA] interface GigabitEthernet 1/0/1 

[SwitchA-GigabitEthernet1/0/1] stp disable 

[SwitchA-GigabitEthernet1/0/1] quit 

[SwitchA] interface GigabitEthernet 1/0/2 

[SwitchA-GigabitEthernet1/0/2] stp disable 

# Return to system view. 

[SwitchA-GigabitEthernet1/0/2] quit 

# Create Smart Link group 1 and enter the corresponding Smart Link group view.  

[SwitchA] smart-link group 1 

# Configure GigabitEthernet 1/0/1 as the master port and GigabitEthernet 1/0/2 as the slave port for 

Smart Link group 1.  

[SwitchA-smlk-group1] port GigabitEthernet 1/0/1 master 

[SwitchA-smlk-group1] port GigabitEthernet 1/0/2 slave 

# Configure to send flush messages within VLAN 1.  

[SwitchA-smlk-group1] flush enable control-vlan 1 

2)  Enable the function of processing flush messages received from VLAN 1 on Switch C. 

# Enter system view. 

<SwitchC> system-view