Enterasys Networks 6H3xx Mode D'Emploi

To set up the IGMP protocol for each VLAN, proceed as follows:

1. Use the arrow keys to highlight the VLAN ID field, and use the SPACE bar to step through the 

VLAN choices to find the correct VLAN to configure.

2. Use the arrow keys to highlight the IGMP State field. 

VLAN ID 
(Selectable)

See the Identifying number of the VLANs available to be modified. If 
there are no VLANs available, NONE is displayed in this field and 
asterisks (*) will display in the Configuration, Statistics, and IGMP 
State fields. The information under Configuration and Statistics applies 
only to this VLAN ID. Use the SPACE bar to step through all available 
VLAN IDs.

The fields that are selectable or modifiable will initially display 
asterisks (*), then the SPACE bar can be used to display the selectable 
fields, and the numeric keys can be used to change the modifiable 
fields.

To update the Configuration and Statistics fields for a selected 
VLAN ID, use the SAVE command.

IGMP State 
(Selectable)

See the current state of the VLAN indicated in the VLAN ID field, 
which can be modified. Use the SPACE bar to step through the choices: 
ENABLED, DISABLED, and DELETE. The commands will act only 
on the VLAN whose ID is in the VLAN ID field.

NOTE: The VLAN IDs are those of the VLANs created using the Static VLAN 
Configuration screen described in 

. 

However, a VLAN ID of a VLAN not yet created can be entered, and the parameters can 
be configured and saved using the SAVE command. However, the VLAN and its 
configuration is not functional until that VLAN is created using the Static VLAN 
Configuration screen. Parameters not modified default according to the MIB.