Enterasys Networks 6H3xx Mode D'Emploi

3. Use the SPACE bar to select ENABLED, DISABLED, or DELETE. If a specific VLAN was 

, ENABLED and DISABLED are used to enable or disable the IGMP 

configuration of the chosen VLAN. (DELETE will remove the IGMP configuration of the 
VLAN.)

4. Use the arrow keys to highlight the IGMP Version field. Then use the SPACE bar to select the 

proper IGMP version for the VLAN shown in the VLAN ID field. 

5. Use the arrow keys to highlight the remaining fields: Query Interval, Query Response Time, 

Interface Robustness, Last Member Query Interval, and Switch Query IP. Enter the desired 
numbers in each field.

6. Use the arrow keys to highlight the SAVE command and press the ENTER key to save the 

information in all the fields that were changed. Repeat this procedure for each VLAN that you 
want to configure for IGMP.

NOTE: When configuring IGMP, it is advisable to follow the IGMP configuration rules in 
RFC 2236 concerning switches, and routers.