Avaya C460 Manuel D’Utilisation
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
95
Example:
To set the time until the system disconnects an idle session automatically to 20
minutes:
To set the time until the system disconnects an idle session automatically to 20
minutes:
set mac-aging
User level: privileged, supervisor.
L This command is available on the P330-ML switches only.
Use the set mac-aging command to enable or disable the MAC aging function.
L This command is available on the P330-ML switches only.
Use the set mac-aging command to enable or disable the MAC aging function.
The syntax for this command is:
set mac-aging
<status>
Examples:
set mac-aging-time
User level: privileged, supervisor.
L This command is available on the P330-ML switches only.
Use the set mac-aging-time command to set the MAC aging time in minutes.
This is the time after which unused MAC addresses in the MAC table are erased.
L This command is available on the P330-ML switches only.
Use the set mac-aging-time command to set the MAC aging time in minutes.
This is the time after which unused MAC addresses in the MAC table are erased.
The syntax for this command is:
Set mac-aging-time <aging-time>
C460-1# set logout 20
Sessions will be automatically logged out after 20 minutes
of idle time.
of idle time.
status
enable / disable
C460-1# set mac-aging enable
mac aging is enabled.
C460-1# set mac-aging disable
mac aging is disabled.
aging-
time
time
Aging time in minutes (1 to 3600; default =5).