Avaya C460 Manuel D’Utilisation

Chapter 2        Avaya C460 CLI Commands

Avaya C460 Reference Guide

115

User level: read-write, admin.
Use the set port redundancy command to defines or remove redundancy pairs. The 
link can be any port that does not belong to a LAG, or a LAG interface.  Ensure that 
there is no redundancy scheme already defined on any of the links. 

The syntax for this command is:

<module>/<prim_port> <module>/

<second_port> {on/off} [<redundancy_name>]

Example:

If you wish to define a name which includes spaces, you must enclose the entire 
name in quotation marks, for example “new york”.

User level: read-write, admin.
Use the set port redundancy-intervals command to configures the two time 
constants that determine redundancy switchover parameters: 
•

“Min Time-between-switchovers” is the minimum interval between switchover 
of each pair. 

•

“Switchback-interval” is the period the primary port link has to be “up” before 
the system switches back.  
If the switchback interval is zero, the system never switches back. If it is one, 
switchback occurs immediately after the primary port link returns.

prim_port

Primary port of the redundancy scheme

second_port

Secondary port of the redundancy scheme

redundancy_name
(Optional)

Name for the redundancy scheme

C460-1# set port redundancy 3/7 4/12 on red1

red1: Port 2/12 is redundant to port 1/7.

Port redundancy is active - entry is effective immediately