Avaya C460 Manuel D’Utilisation

Chapter 2        Avaya C460 CLI Commands

Avaya C460 Reference Guide

159

User level: read-only, read-write, admin.
Use the show ip interface command to display information for an IP interface.

The syntax for this command is:

[<interface-name>]|<ip-address>|<vlan>]

Example:

If you wish to define a name which includes spaces, you must enclose the entire 
name in quotation marks, for example “new york”.

interface-name

The name of the interface whose information you 
want to display.

ip-address

The IP address of the interface whose information 
you want to display.

vlan

The name or ID of the VLAN over which there are 
interfaces you want to display.

Router-1> show ip interface

Showing 2 Interfaces

mgmt is administratively up

 On vlan Default

 Internet address is 10.49.54.14   , subnet mask is 

255.255.255.0

 Broadcast address is 10.49.54.255

 Directed broadcast forwarding is disabled

 Proxy ARP is disabled

baba is administratively down

 On vlan v2

 Internet address is 192.168.0.14     , subnet mask is 

255.255.0.0

 Broadcast address is 192.168.255.255

 Directed broadcast forwarding is disabled

 Proxy ARP is disabled