Avaya C460 Manuel D’Utilisation
Chapter 2 Avaya C460 CLI Commands
160
Avaya C460 Reference Guide
show ip interface brief
User level: read-only, read-write, admin.
Use the show ip interface brief command to display brief information for
an IP interface.
Use the show ip interface brief command to display brief information for
an IP interface.
The syntax for this command is:
show ip interface brief [<interface> | <vlan> | <IP addr>]
Example:
show ip ospf
User level: read-only, read-write, admin.
Use the show ip opsf command to displays general information about OSPF
routing.
Use the show ip opsf command to displays general information about OSPF
routing.
The syntax for this command is:
show ip ospf
Example:
interface
The name of the interface whose information you
want to display - a string of up to 32 characters.
want to display - a string of up to 32 characters.
vlan
The name or ID of the VLAN over which there are
interfaces you want to display - a string of up to 32
characters.
interfaces you want to display - a string of up to 32
characters.
IP addr
The IP address of the interface whose information
you want to display.
you want to display.
Router-1> show ip interface brief
Showing 1 Interfaces
Interface Address Mask Status
-------------------- --------------- --------------- --------------------
net 149.49.54.56 255.255.255.0 up
Router-1> show ip ospf