Avaya C460 Manuel D’Utilisation
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
163
show ip reverse-arp
User level: read-only, read-write, admin.
Use the show ip reverse-arp command to display the IP address of a host,
based on a known MAC address.
Use the show ip reverse-arp command to display the IP address of a host,
based on a known MAC address.
The syntax for this command is:
show ip reverse-arp
<mac addr> [<match len>]
Example:
show ip route
User level: read-only, read-write, admin.
Use the show ip route command to display IP routing table entries.
Use the show ip route command to display IP routing table entries.
The syntax for this command is:
show ip route
Example:
show ip route (Layer 3)
User level: read-only, read-write, admin.
Use the show ip route command to display information about the IP unicast
Use the show ip route command to display information about the IP unicast
mac addr
MAC address
match len
The number of bytes in the address to match
Router-1> sh ip reverse-arp 00:10:a4:98:97:e0
Showing 1 rows
Address MAC Address I/F Type TTL
--------------- ----------------- ----------- ------- --------
149.49.70.68 00:10:a4:98:97:e0 e-70 Dynamic 14355
C460-1> show ip route
Network Mask Next-Hop Interface Source
---------------- ---------------- ---------------- ----------- ------
-
149.49.50.0 255.255.255.0 149.49.50.233 inband LOCAL
0.0.0.0 0.0.0.0 149.49.50.1 inband STATIC