Avaya C460 Manuel D’Utilisation
Chapter 2 Avaya C460 CLI Commands
162
Avaya C460 Reference Guide
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
name in quotation marks, for example “new york”.
show ip ospf neighbor
User level: read-only, read-write, admin.
Displays OSPF-neighbor information on a per-interface basis.
The syntax for this command is: show ip ospf neighbor
[<interface-name>] [<neighbor-id>]
Displays OSPF-neighbor information on a per-interface basis.
The syntax for this command is: show ip ospf neighbor
[<interface-name>] [<neighbor-id>]
Example:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
name in quotation marks, for example “new york”.
show ip protocols
The syntax for this command is:
show ip protocols
[<protocol>]
Example:
interface-name
The OSPF interface name.
neighbor-id
Neighbor ID.
Router-1> show ip ospf neighbor
protocol
(Optional)
(Optional)
RIP | OSPF.
Router-1 (super) # show ip protocols
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 0 seconds
Invalid after 180 seconds, flushd after 300
Redistributing: rip
Default version control: rip version 1
Interface Version Key
Routing for Networks:
Routing Information Sources:
Gateway Last Update