Avaya P332MF Manuel D’Utilisation

Chapter 6

CLI – Layer 2

112

Avaya P332MF User’s Guide

The syntax for this command is:

set inband vlan <value>

Output Example:

P330-N# set inband vlan 1

Management VLAN number set to 1

Use the 

set vlan

 command to create VLANs. 

The syntax for this command is:

set vlan <vlan-id> [name <vlan-name>]

Output Example:

P330-N# set vlan 3 name v3

VLAN ID 3 is named v3.

If you wish to define a name which includes spaces, you must enclose the 

entire name in quotation marks, e.g. "new york".

Use the

 set port flowcontrol 

command to set the send/receive mode for 

flow-control frames (IEEE 802.3x or proprietary) for a full duplex port. Each 
direction (send or receive) can be configured separately only for Gigabit Ethernet 
ports. Proprietary flow control cannot be configured on Gigabit ports. The

 set 

flowcontrol 

command cannot be used on Gigabit ports for which 

autonegotiation is enabled.

The syntax for this command is:

set flowcontrol [direction] [module/port] [value]

where the parameters of 

direction

 are 

receive|send|all

,  and the parameters 

of 

value

 are 

on|off|proprietary

.

value

A VLAN number between 1 and 3071.

vlan-id

vlan number

vlan-name

vlan name