Avaya P332MF Manuel D’Utilisation

Chapter 6

CLI – Layer 2

Avaya P332MF User’s Guide

111

Use the 

set port security

 command to enable MAC security on a port or a 

range of ports at the module level. The port security is activated only after you 
enable the secutity mode at the stack level using the 

set security mode

 

command.

This command is not supported in P332G-ML and P332GT-ML switches. This 

command is used to set port security for ports in other P330 switches in the stack.

The syntax for this command is:

set port security { enable | disable } [<module>[/<port>]]

Output Example:

P330-N> set port security enable 1/2

Port 1/2 secured.

Use the 

set cascading

  command to enable or disable fault-trap sending for 

unconnected cascading links. The default setting is disable.

The syntax for this command is:

set cascading{up|down}fault-monitoring {enable|disable}

<mod-num> 

Output Example:

P330-N# set cascading down fault-monitoring enable 1

Module 1 cascading-down fault monitoring enabled.

Use the

 set inband vlan 

command to set a value for the management vlan 

(from 1 to 3071).

enable | disable

Set the port security enable or disable

module/port

The switch number/the port number