Avaya P332MF Manuel D’Utilisation

Chapter 6

CLI – Layer 2

130

Avaya P332MF User’s Guide

For more information , use 'show tftp upload status' command

********************************************************************

* If you are currently running the P330 Device Manager application,*

* it is recommended to exit from it before performing configuration*

* download operations.                                             *

********************************************************************

Use the

 copy tftp stack-config 

command to download the stack-level 

configuration from a saved file into the current NVRAM running configuration, via 
TFTP. To use this command, you need to have an active tftp server, and to create a 
file into which to download the data. If Avaya Multi-Service Network Manager is 
running, an additional TFTP server is not required.

You should perform the 

nvram initialize

 command prior to the 

copy tftp

 operation.

The syntax for this command is:

copy tftp stack-config <filename> <ip>

Example:

P330-N# copy tftp stack-config c:\config\switch1.cfg 

192.168.49.10

Use the

 copy tftp module-config 

command to download the switch-level 

configuration from a saved file into the current NVRAM running configuration of a 
switch, via TFTP. To use this command, you need to have an active tftp server, and 
to create a file into which to download the data. If Avaya Multi-Service Network 
Manager is running, an additional tftp server is not required. 

You should perform the 

nvram initialize

 command prior to the 

copy tftp

 operation.

filename

The file name (full path)

ip

The IP address of the TFTP server