Avaya M770 Manuel D’Utilisation
Chapter 11
Managing the Management LEC
164
Avaya M770 ATM Switch User’s Guide
Viewing information about the management LEC
To view information about the management LEC, use the
lane lec
show
command.
The
lane lec information
command displays the information described in
Command:
M15-155s8:/>lane lec show
Table 11.1
Output from the lane lec show command
Field
Description
BIA
The switch’s BIA, which will be used as the management
LEC’s MAC address, if the LAA address is not set.
LEC’s MAC address, if the LAA address is not set.
LAA
The LAA, which will be used as the management LEC’s
MAC address if set. If zeros are displayed, the management
LEC will use the BIA.
MAC address if set. If zeros are displayed, the management
LEC will use the BIA.
LEC State
The operational state of the management LEC.
• Initial State
• LECS Connect
• configure
• join
• initial Registration
• bus connect
• operational - This is the final state of the LEC.
• Initial State
• LECS Connect
• configure
• join
• initial Registration
• bus connect
• operational - This is the final state of the LEC.
ELAN name
(actual)
(actual)
The name of the ELAN that the management LEC is
currently registered with.
currently registered with.
ELAN name
(configured)
(configured)
The name of the ELAN that the management LEC will
attempt to register with when it is restarted.
attempt to register with when it is restarted.
ELAN type
(actual)
(actual)
The type of ELAN that the management LEC is currently
registered with.
registered with.
LAN type
(configured)
(configured)
The type of ELAN that the management LEC will attempt to
register with when the LEC is restarted.
register with when the LEC is restarted.
LES address
The ATM address of the LES where the management LEC
has registered its address.
has registered its address.
Maximum frame
size (bytes)
size (bytes)
The maximum frame size that the ELAN can support. The
value is obtained from the LES.
value is obtained from the LES.