Avaya P130 Manuel D’Utilisation

Chapter 6        Avaya P130 CLI

66

 Avaya P130 User’s Guide

Port Commands

Use the 

show port command to display port status.

The syntax for this command is:
P130-N> show port [mod_num[/port_num]]

Example:

To display the status for port 4 on module 1:
P130-N> show port 1/4

Port  Name  Status  VLAN  Level  Neg    Dup.  Spd.  Type
---- -----  ------  ----- ------ -----  ---- ------ ------
1/4  NoName disabled 203  normal enable full  100M 100BaseT

Show Port Output Fields:

mod_num

Module number (optional). If you do not specify a 
number, the ports on all modules are shown.

port_num

Number of the port on the module (optional). If you 
do not specify a number, all the ports on the module 
are shown.

Port

Module and port number

Name

Name of the port

Status

Status of the port (connected, faulty, disabled)

VLAN

VLAN ID of the port

Level

Priority level of the port (normal or high)

Neg

The negotiation status of the port (enable, disable)

Duplex

Duplex setting for the port (fdx, hdx)

Speed

Speed setting for the port (10, 100, 1000)

Type

Port type, for example, 10/100BaseTX, GBIC_SX, 
GBIC_LX, GBIC_not present, GBIC_unknown, 1000Base-
T