Avaya P130 Manuel D’Utilisation

Chapter 6        Avaya P130 CLI

Avaya P130 User’s Guide

67

Use the 

show port flowcontrol command to display per-port status 

information related to flow control.

The syntax for this command is:
show port flowcontrol [mod_num/port_num] 

Example:

To display the flow-control port status and statistics:
Console> show port flowcontrol
Port    Send-Flowcontrol    Receive-Flowcntl
          Admin Oper          Admin Oper
-----   ------- ------      ------- -----
1/2       off   off           off   off
1/3       on    on            off   off
etc.
Output Fields:

mod_num

Module number (optional). 

port_num

Number of the port on the module (optional). If you 
do not specify a number, filters configured on all the 
ports on the module are shown.

Port

Module and port number

Send- Flowcontrol-Admin

Send flow-control administration. Possible 
settings:
- on indicates the local port is capable of sending a 
flow control advertisement to the far end;
- off indicates the local port is not capable of 
sending a flow control advertisement to the far end

Send- Flowcontrol-Oper

Send flow-control operation mode

Receive- Flowcontrol-Admin Receive flow-control administration. Possible 

settings:
- on indicates the local port can request the far end 
to send flow control advertisement;
- off indicates the local port cannot request the far 
end to send flow control advertisement

Receive- Flowcontrol-Oper

Receive flow-control operation mode